Command Details - HP ProCurve 5400zl Reference Manual

Command Line Interface Reference Guide

COMMAND DETAILS

ascii (p. 186)
connection-rate (p. 186)
connection-rate-portlist (p. 186)
drop (p. 186)
ascii
■ [no] filter source-port named-filter ASCII
Set the filter name.
Next Available Options:
forward
■
PORT-LIST)
drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
■
PORT-LIST)
connection-rate
■ [no] filter connection-rate
Usage: [no] filter connection-rate port-list
Description: Selects behavior for port(s) when a host is filtered.
Next Available Option:
connection-rate-portlist
■
connection-rate-portlist
■ [no] filter connection-rate [ETHERNET] PORT-LIST
Next Available Option:
filter-action
■
drop
■ filter source-port named-filter ASCII drop [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is not permitted.
■ filter source-port [ETHERNET] PORT-LIST forward [ETHERNET] PORT-LIST drop [ETHERNET]
PORT-LIST
Set a list of ports to which forwarding of filtered packets is not permitted.
■ filter source-port [ETHERNET] PORT-LIST drop [ETHERNET] PORT-LIST
Set a list of ports to which forwarding of filtered packets is not permitted.
© 2009 Hewlett-Packard Development Company, L.P.
filter-action (p. 187)
forward (p. 187)
multicast (p. 187)
named-filter (p. 188)
-- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
(p. 187)
(p. 186)
Block will disable the host until an administrator explicitly
re-enables access.
specific penalty period before automatically re-enabling
access. Notify will simply log a message/send a SNMP
trap when the filter is tripped.
-- ([ethernet] PORT-LIST)
< block | notify-only | throttle > --
< notify-only | throttle | block>
Throttle will deny network access for a
(p. 186)
(p. 187)
port-list (p. 188)
protocol (p. 188)
source-port (p. 189)
filter
186