HP ProCurve 5400zl Reference Manual page 358

Command Line Interface Reference Guide
Next Available Options:
basicTlvEnable
■
to be advertised. (NUMBER)
ipAddrEnable
■
dot1TlvEnable
■
medTlvEnable
■
be advertised. (NUMBER)
medPortLocation
■
dot3TlvEnable
■
(p. 356)
COUNTRY
■ lldp config [ETHERNET] PORT-LIST medPortLocation civic-addr COUNTRY
Specify the Country Code of two characters.
Next Available Option:
WHAT -- Specify the 'what' number of range <0-2>. (NUMBER)
■
dot1TlvEnable
■ lldp config [ETHERNET] PORT-LIST dot1TlvEnable
Specify the 802.1 TLV List to be advertised.
Next Available Option:
vlan-name
■
dot3TlvEnable
■ [no] lldp config [ETHERNET] PORT-LIST dot3TlvEnable < macphy_config >
Specify the 802.3 TLV List to be advertised.
Supported Values:
■ macphy_config -- MAC Physical Config Tlv
elin-addr
■ [no] lldp config [ETHERNET] PORT-LIST medPortLocation elin-addr
Specify the elin address location to be advertised.
Next Available Option:
addr -- Specify the Location name to be advertised. (OCTET-STR)
■
enable-notification
■ [no] lldp enable-notification [ETHERNET] PORT-LIST
Usage: [no] lldp notificationEnable <PORT-LIST>
Description: Set the port for which notification should be enabled.
© 2009 Hewlett-Packard Development Company, L.P.
< port_descr | system_name | system_descr | ... > -- Specify the Basic TLV List
(p. 354)
-- Set IP ADDR to be
-- Specify the 802.1 TLV List to be
< capabilities | network_policy | location_id | ... > -- Specify the MED TLV List to
(p. 357)
-- Configure location-id information to be advertised.
< macphy_config > -- Specify the 802.3 TLV List to be advertised. (NUMBER)
-- Specify that the VLAN name TLV is to be advertised.
enabled.(p. 357)
advertised.(p. 356)
(p. 357)
(p. 359)
(p. 359)
(p. 353)
lldp
356