HP ProCurve 5400zl Reference Manual page 220

Command Line Interface Reference Guide
Parameters:
o dhcp-bootp - The switch attempts to get its configuration from a
DHCP/Bootp server.
o IP-ADDR/mask-LENGTH - Assign an IP address to the switch or VLAN.
The IP-ADDR/mask-LENGTH may be specified in two ways using the
following syntax:
Both of the statements above would have the same effect.
Multiple addresses may be configured on a single VLAN.
Next Available Options:
ip-addr -- Interface IP address/mask. (IP-ADDR/mask-LENGTH)
■
dhcp-bootp
■
■ [no] interface svlan VLAN-ID ipv6 address
Usage: [no] ipv6 address [dhcp|autoconfig|IPv6-ADDR/PREFIX-LEN]
Description: Set IPv6 parameters for communication within an IP network.
Parameters:
o autoconfig - Enables automatic address configuration of IPv6
addresses using stateless configuration of an interface .
o dhcp - The switch attempts to get its configuration from a
DHCPv6 server.
o IPv6-ADDR/PREFIX-LEN-Assign an IPv6 address to the switch or VLAN.
The IPv6-ADDR/PREFIX-LEN may be specified in four ways using the
following syntax:
Only link-local addreses are configured without PREFIX-LEN as below:
Multiple addresses may be configured on a single VLAN.
Next Available Options:
autoconfig
■
dhcp -- Configure a DHCPv6
■
ipv6-addr
■
© 2009 Hewlett-Packard Development Company, L.P.
configuration. The VLAN for which the configuration is
applied can be specified implicitly by preceding the
phrase 'ip address' with the 'vlan VLAN-ID' keyword and
argument. It can also be called explicitly when called
directly from a VLAN context.
command affects the VLAN identified by the context.
ip address 192.32.36.87/24
ip address 192.32.36.87 255.255.255.0
-- Configure the interface to use DHCP/Bootp server to acquire
Each VLAN represents an IPv6 interface having its own unique
configuration. The VLAN for which the configuration is
applied can be specified implicitly by preceding the
phrase 'ipv6 address' with the 'vlan VLAN-ID' keyword and
argument. It can also be called explicitly when called
directly from a VLAN context.
command affects the VLAN identified by the context.
ipv6 address 1234:abcd::5678/40
ipv6 address 2001:0db8:1:1:ffff:ffff:ffff:fffe/64 anycast
ipv6 address 2001:0db8:0:1::/64 eui-64
ipv6 address FE80:0:0:0:0123:0456:0789:0abc link-local
-- Automatic address
client.(p. 230)
-- Configure a link-local IPv6 address. (IPV6-ADDR)
In the latter case the
In the latter case the
configuration.(p. 225)
(p. 241)
parameters.(p. 230)
(p. 245)
interface
218