HP ProCurve 5400zl Reference Manual page 594

Command Line Interface Reference Guide
community
■
enable -- Show SNMPv3 status.
■
engineid
■
group -- Show SNMPv3 User to Group mappings.
■
notify -- Show SNMPv3 notification table.
■
only -- Show SNMP message reception policy.
■
params
■
restricted-access
■
targetaddress
■
user -- Show SNMPv3 users.
■
view -- Show views.
■
sntp
■ show sntp
Usage: show sntp
Description: Show configured time protocol and servers.
source-binding
■ show ip source-binding
Show Dynamic IP Lockdown trap status.
Next Available Option:
traps -- Show Dynamic IP Lockdown trap status.
■
source-lockdown
■ show ip source-lockdown
Show Dynamic IP Lockdown configuration.
Next Available Options:
status -- Show Dynamic IP Lockdown port status.
■
bindings
■
source-port
■ show filter source-port
Usage: show filter source-port
Description: Show a table of source-port filter names
spanning-tree
■ show spanning-tree
Usage: show spanning-tree [[ethernet] PORT-LIST] [config|detail]
show spanning-tree [[ethernet] PORT-LIST] instance <ist|INSTANCE-ID>
© 2009 Hewlett-Packard Development Company, L.P.
-- Show SNMPv3 Community table.
-- Show switch's SNMP engineId.
-- Show SNMPv3 Target Parameters table.
-- Show SNMPv1 and SNMPv2c access properties.
-- Show SNMPv3 Target Address table.
(p. 601)
(p. 602)
-- Show source bindings for Dynamic IP Lockdown ports.
with the associated source ports and actions
(p. 539)
(p. 550)
(p. 550)
(p. 553)
(p. 574)
(p. 574)
(p. 575)
(p. 599)
(p. 596)
(p. 586)
(p. 597)
(p. 534)
show
592