HP ProCurve 5400zl Reference Manual page 748

Command Line Interface Reference Guide
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
■ vlan VLAN-ID ip rip all receive < V1-only | V2-only | V1-or-V2 | ... >
Define RIP version for incoming packets.
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
retransmit-interval
■ vlan VLAN-ID ip ospf retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■ vlan VLAN-ID ip ospf IP-ADDR retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■ vlan VLAN-ID ip ospf all retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
rip
■ [no] vlan VLAN-ID ip rip
Usage: [no] ip rip [...]
Description: Enable/disable/configure Routing Internet Protocol (RIP)
Next Available Options:
authentication-type
■
authentication-key
■
metric < 1 to 15 > -- Set metric for this
■
poison-reverse
■
receive < V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming
■
send < disabled | V1-only | V1-compatible-V2 | ... > -- Define RIP version for outgoing
■
747)
rip-compatible
■
packets.(p. 747)
© 2009 Hewlett-Packard Development Company, L.P.
on the VLAN interface.
Called without 'no', the command enables RIP on the interface.
Otherwise ('no' is specified), the command disables RIP on the
interface. The command can be followed by a RIP configuration
command. Use 'ip rip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
< none | text > -- Set authentication type used on this
-- Set RIP authentication key (maximum 16
-- Enable/disable poison reverse on this
< V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and outgoing
interface.(p. 734)
interface.(p. 741)
interface.(p. 718)
characters).(p. 717)
packets.(p. 745)
packets.(p.
vlan
746