HP ProCurve 5400zl Reference Manual page 462

Command Line Interface Reference Guide
dyn-autz-port
■ radius-server dyn-autz-port < 1024 to 49151 >
UDP port number to listen for Change-of-Authorization and Disconnect messages
(default is 3799).
Range: < 1024 to 49151 >
host
■ [no] radius-server host IP-ADDR
IP address of the RADIUS server to use.
Next Available Options:
acct-port
■
auth-port
■
dyn-authorization
■
time-window
■
requests are considered to be current and accepted for processing.
key -- Encryption key to use with the RADIUS server (default is
■
key
■ radius-server host IP-ADDR acct-port TCP/UDP-PORT key KEY
Encryption key to use with the RADIUS server (default is NULL).
■ radius-server host IP-ADDR auth-port TCP/UDP-PORT key KEY
Encryption key to use with the RADIUS server (default is NULL).
■ [no] radius-server host IP-ADDR key
Encryption key to use with the RADIUS server (default is NULL).
Next Available Option:
key -- Encryption key to use with the RADIUS server (default is NULL). (ASCII-STR)
■
■ radius-server host IP-ADDR key KEY
Encryption key to use with the RADIUS server (default is NULL).
Next Available Options:
acct-port
■
458)
auth-port
■
(p. 459)
■ [no] radius-server key
Global encryption key (default is NULL).
Next Available Option:
key -- Encryption key to use with the RADIUS server (default is NULL). (ASCII-STR)
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Accounting UDP destination port number (default is
-- Authentication UDP destination port number (default is
-- Enable/disable dynamic authorization control from this
-- time window (in seconds) within which the received dynamic authorization
-- Accounting UDP destination port number (default is 1813). (TCP/UDP-PORT)
-- Authentication UDP destination port number (default is 1812). (TCP/UDP-PORT)
radius-server
1813).(p. 458)
1812).(p. 459)
host.(p. 459)
(p. 461)
NULL).(p. 460)
(p. 460)
(p. 460)
(p.
460