Step 4 - Apply Port - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Traffic Class
TCP Flag
Flow Label
Time Range
Action
Click the Back button to return to the previous step.
Click the Next button to continue to the next step.

Step 4 - Apply Port

After clicking the Next button, the following window will appear.
The fields that can be configured are described below:
Parameter
From Port - To Port
Direction
Click the Back button to return to the previous step.
Click the Apply button to accept the changes made and return to the main ACL Wizard window.
Description
Select and enter the traffic class value here. The range is from 0 to 255.
Tick the appropriate TCP flag option to include the flag in this rule. Options to
choose from are ack, fin, psh, rst, syn, and urg.
This parameter is only available in the protocol type TCP.
Enter the flow label value here. This value must be between 0 and 1048575.
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Figure 8-7 ACL Configuration Wizard (Create, Port) Window
Description
Select the appropriate port range used for the configuration here.
Specifies that the In direction is used.
159