Step 4 - Apply Port; Acl Access List - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Click the Back button to return to the previous window.

Click the Next button to continue.

Step 4 - Apply Port

After clicking the Next button, the following window will appear.

The fields that can be configured are described below:

From Port ~ To Port

Click the Back button to return to the previous window.

Click the Apply button to accept the changes made.

This window is used to view and configure the ACL access list settings.

To view the following window, click ACL > ACL Access List, as shown below:

The fields that can be configured are described below:

are Permit and Deny.

Figure 8-29 ACL Configuration Wizard (Create, Port) Window

Select the switch unit that will be used for this configuration here.

Select the appropriate port range used for the configuration here.

Select the direction here. Options to choose from are In and Out.

Figure 8-30 ACL Access List Window

Select the ACL type to find here. Options to choose from are All, IP