Port Configuration; Port Settings - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
The fields that can be configured in Environment Temperature Threshold Settings are described below:
Parameter
High Threshold
Low Threshold
Click the Apply button to accept the changes made.

Port Configuration

Port Settings

This window is used to display and configure the Switch's port settings.
To view the following window, click System > Port Configuration > Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port - To Port
State
MDIX
Description
Enter the high threshold value of the warning temperature setting. The range is
from -100 to 200 degrees Celsius. Tick the Default check box to return to the
default value.
Enter the low threshold value of the warning temperature setting. The range is
from -100 to 200 degrees Celsius. Tick the Default check box to return to the
default value.
Figure 3-4 Port Settings Window
Description
Select the appropriate port range used for the configuration here.
Select to enable or disable the physical port state here.
Select the Medium Dependent Interface Crossover (MDIX) option here. Options to
choose from are:
• Auto - Select this option for auto-sensing of the optimal type of cabling.
• Normal - Select this option for normal cabling. If this option is selected, the
port is in the MDIX mode and can be connected to a PC NIC using a straight-
through cable or a port (in the MDI mode) on another Switch through a
crossover cable.
14