System > System Information Settings > Ipv4 Interface; System > Port Configuration > Port Settings - D-Link DGS-1100-05PDV2 User Manual

Smart managed switch
Hide thumbs Also See for DGS-1100-05PDV2:
Table of Contents

Advertisement

4 Configuration
System Location
System Contact
Web Session Timeout
(60-36000)
Click Apply to make the configurations take effect.
System > System Information Settings > IPv4 Interface
The IPv4 Interface allows the user to configure the IP address and the basic system information of the
Switch.
The fields that can be configured for IP Settings are described below:
Item
IP Settings
IP Address
Mask
Gateway
DHCP Retry Time (5-
120)
Click Apply to make the configurations take effect.
System > Port configuration > Port Settings
In the Port Setting page, the status of all ports can be monitored and configured.
Specify the system location of the Switch.
Specify the system contact of the Switch.
The Web Session Timeout controls the idle time-out period for
security purposes, when there is no activity in the web
interface within the specified time-out period. If the current
session times out (expires), the user is required to log into the
web management interface again. Selective range is from 60
to 36000 seconds, and the default setting is 180 seconds.
Figure 4.14 – System > System Information Settings > IPv4 Interface
Description
There are two ways for the Switch to obtain an IP address:
Static and DHCP (Dynamic Host Configuration Protocol).
When using static mode, the IP Address, Mask, Gateway and
DHCP Retry Time can be manually configured. When using
DHCP mode, the Switch will first look for a DHCP server to
provide it with an IP address (including network mask and
default gateway) before using the default or previously entered
settings.
Specify the IPv4 address. By default, the IP address is
10.90.90.90
Specify the subnet mask of IP address. By default, the subnet
mask is 255.0.0.0
Specify the gateway of IP address. By default, the gateway is
0.0.0.0
Specify the number of attempts to assign an IP address
through a DHCP server. Selective range is from 5 to 120 times,
and the default setting is 7 times.
D-Link Smart Managed Switch User Manual
Table 4.1
Table 4.2
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-1100-05v2Dgs-1100-08v2Dgs-1100-08pv2

Table of Contents