Asymmetric Vlan Commands - D-Link Dis-200G Series Cli Reference Manual

4.

Asymmetric VLAN Commands

4-1 asymmetric-vlan
his command is used to enable the asymmetric VLAN function. Use the no form of this command todisable the
asymmetric VLAN function.
asymmetric-vlan
no asymmetric-vlan
Parameters
None.
Default
By default, this feature is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
Use this command to enable or disable the asymmetric VLAN function.
Example
This example shows how to enable asymmetric VLAN.
Switch# configure terminal
Switch(config)# asymmetric-vlan
This example shows how to disable asymmetric VLAN.
Switch# configure terminal
Switch(config)# no asymmetric-vlan
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
22