Switchport Customer Multicast-Tv Vlan - D-Link xStack DWS-3200 Series Cli Manual

Address Table Commands
bridge address

switchport customer multicast-tv vlan

The switchport customer multicast-tv vlan Interface Configuration mode command enables receiving multicast
transmissions from a VLAN that is not the customer port's VLAN, while keeping the L2 segregation with
subscribers on different Customer port VLANs.
Syntax
switchport customer multicast-tv vlan {add vlan-list | remove vlan-list}
Parameters
•
vlan-list — List of Multicast TV VLANs.
Default Setting
The port is not member in any multicast TV VLAN.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
The user cannot transmit multicast transmissions on multicast TV VLANs.
Example
The following example enables receiving multicast transmissions from a VLAN that is not the customer port's
VLAN.
Console(config-if)# switchport customer multicast-tv vlan add 3000
Page 58