Table of Contents
Advertisement
4 Configuration
L2 Features > FDB > MAC Address Table
This window is used to view the entries listed in the MAC address table.
The fields that can be configured are described below:
Item
Port
Click Find to locate a specific entry based on the information entered.
Click Select All to select up to 32 dynamic MAC addresses.
Click Clean All to clear the selected dynamic MAC addresses.
Click the Corresponding check box(es) in the Add column to select the specific dynamic MAC address(es).
Select the page number in the Page drop-down list to navigate to a specific page when multiple pages exist.
Click Pre Page to go to the previous page when multiple pages exist.
Click Next Page to go to the next page when multiple pages exist.
Click Apply to add the selected dynamic MAC address(es) to unicast static FDB.
L2 Features > VLAN > 802.1Q VLAN
A Virtual Local Area Network (VLAN) is a group of ports that can be anywhere in the network, but
communicate as though they were in the same area.
Figure 4.30 - L2 Features > FDB > MAC Address Table
Description
Select a single port or all ports. The information for the port(s) will
be displayed in the information table.
Table 4.15
NOTE: When viewing the different FDB pages,
the device will take a moment to refresh the UI.
2
2
3
3
D-Link Smart Managed Switch User Manual
Advertisement
Table of Contents
