Step 7: Mount The Device - Proxim Tsunami Multipoint MP-820-BSU-100 Installation Manual
Tsunami 800 and 8000 series (point-to-point and point-to-multipoint products)
Hide thumbs
Also See for Tsunami Multipoint MP-820-BSU-100:
- Software management manual (170 pages) ,
- Hardware installation manual (91 pages)
Table of Contents
Advertisement
4. Tighten the assembled parts (Torque 15 N . m/130 in-lbs).
The following figure shows the full assembled mounting hardware fixed to the device.
Step 7: Mount the Device
1. To pole-mount the device, insert the provided screws and washers through bracket (F). Fasten around the pole to
bracket (C) and secure (Torque 11 N.m/100 in-lbs).
®
Tsunami
800 and 8000 Series - Hardware Installation Guide
800 Series - Hardware Overview and Installation
Figure 2-5 Assembled Device
Figure 2-6 Pole Mounting
22
Hide quick links:
Advertisement
Table of Contents
