Connectors; Data Contacts/Internal Bus; Figure 2: Data Contacts - WAGO -I/O-SYSTEM 750 Manual
2ai pt100/rtd 2-channel analog input module for resistance sensors
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
16
Device Description
3.2
Connectors
3.2.1
Data Contacts/Internal Bus
Communication between the fieldbus coupler/controller and the I/O modules as
well as the system supply of the I/O modules is carried out via the internal bus. It
is comprised of 6 data contacts, which are available as self-cleaning gold spring
contacts.
Figure 2: Data Contacts
Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Ensure that the environment is well grounded!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, e.g. data contacts.
WAGO-I/O-SYSTEM 750
750-461 2AI Pt100/RTD
Manual
Version 1.4.0
Advertisement
Chapters
Table of Contents
