Config Firmware; Config Configuration - D-Link DGS-1210 Series Manual

6 Command Line Interface
Restrictions
Example usage:
To upload a firmware file:
DGS-1210-52MP>upload firmware_toTFTP 1.1.1.23 1\running—config image_id 1
01–Jan–2000 01:26:11 %COPY–I–FILECPY: Files Copy – source URL running–config
destination URL tftp://1.1.1.23/1\running–config
.....01–Jan–2000 01:26:16 %COPY–W–TRAP: The copy operation was completed success
fully
!
158 bytes copied in 00:00:05 [hh:mm:ss]
DGS-1210-52MP>

config firmware

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the firmware image id 1 to be used when boot up on the Switch:
DGS-1210-52MP> config firmware image_id 1 boot_up
DGS-1210-52MP>

config configuration

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the configuration image id 1 to be used when boot up on the Switch:
configured.
None.
To configure which firmware image to be boot up.
config firmware image id <integer (1-2)> boot_up
The config firmware image id command configures the
firmware image to be boot up on the Switch.
<integer (1-2)> − Specifies the image 1 or 2 to be configured.
boot_up – Specifies the specified image to be boot up.
None.
To specify which configuration file to be configured.
config configuration config_id <integer (1-2)> {delete |
boot_up}
The config configuration command configures the configuration
image to be deleted or boot up on the Switch.
config_id <integer (1-2)> − Specifies the image 1 or 2 to be
configured.
{delete | boot_up} – Specifies the configuration image to be
deleted or boot up.
None.
150
D-Link Smart Managed Switch User Manual