Config Mld_Snooping Mrouter_Ports; Config Mld_Snooping Mrouter_Ports_Forbidden - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g m l d _ s n o o p i n g q u e r i e r d e f a u l t q u e r y _ i n t e r v a l 1 2 5 s t a t e e n a b le
C o m m a n d : c o n f i g m l d _ s n o o p i n g q u e r i e r d e f a u l t q u e r y _ i n t e r v a l 1 2 5 s t a t e e n a b l e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

33-3 config mld_snooping mrouter_ports

Purpose
Used to configure ports as router ports.
Format
config mld_snooping mrouter_ports <vlan_name 32> [add|delete] <portlist>
Description
The config mld_snooping mrouter_ports command allows you to designate a range of ports as being
connected to multicast-enabled routers. This will ensure that all packets with such a router as its
destination will reach the multicast-enabled router − regardless of protocol, etc.
Parameters
Parameters
vlan_name
add | delete
portlist
Restrictions
You must have administrator privileges.
Example
To set up static router ports:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g mld_snooping m r o u t e r _ p o r t s d e f a u l t a d d 1 - 1 0
C o m m a n d : c o n f i g mld_snooping m r o u t e r _ p o r t s d e f a u l t a d d 1 - 1 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

33-4 config mld_snooping mrouter_ports_forbidden

Purpose
Used to configure ports as forbidden router ports.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN on which the router port resides.
Specifies to add or delete the router ports.
Specifies a range of ports to be configured. (UnitID:port number)
249