Banner Motd; Boot Config - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Command
mode
Usage
guidelines
Examples
2.2.2
To set the Message-of-the-Day (MOTD), run the banner motd command in the
global configuration mode. To delete the MOTD setting, run the no banner
motd command.
banner motd c message c
Parameter
description
Command
mode
Usage
guidelines
Examples
2.2.3
This command is used to set the boot configuration filename for the device. The
no form of this command is used to delete the configured boot configuration
filename.
boot config prefix:/[directory/]filename
Chapter 2 Switch Management Configuration Commands
Global configuration mode.
This command sets the logging banner message, which is
displayed upon login.
terminating symbol will be discarded by the system.
The following example shows the configuration of logging
banner:
DES-7200(config)# banner login $ enter your password $

banner motd

Parameter
c
message
Global configuration mode.
This command sets the MOTD, which is displayed upon
login. The letters entered after the separator will be
discarded.
The following example shows the configuration of MOTD:
DES-7200(config)
DES-7200(config)# banner motd $ hello,world $

boot config

.
All characters behind the
Description
Separator of the MOTD. Delimiters are
not allowed in the MOTD.
Contents of an MOTD
2-19