Table of Contents
Advertisement
4 Configuration
The fields that can be configured are described below:
Item
Access Right
Community Name
Click Apply to create a new SNMP community.
Management > SNMP > SNMP Host Settings
This window is used to configure the recipients of the SNMP notifications.
The fields that can be configured are described below:
Item
Host IPv4 Address
User-based Security
Model
Community String
Click Apply to make the configurations take effect.
Management > D-Link Discovery Protocol
For devices that support the D-Link Discovery Protocol (DDP), this window allows users to enable or disable
DDP, and configure the DDP packet report timer.
Figure 4.24 - Management > SNMP > SNMP Community Table Settings
Description
Select the access right here. Options to choose from are Read
Only, and Read Write.
•
Read Write - SNMP community members can read
from, and write to the contents of the MIBs on the
Switch.
•
Read Only - SNMP community members can only read
the contents of the MIBs on the Switch.
Enter an alphanumeric string of up to 32 characters that is
used to identify members of an SNMP community. This string
is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
Figure 4.25 - Management > SNMP > SNMP Host Settings
Description
Specify the IPv4 address of the SNMP management host.
Specify the security model. The options to choose from are
SNMPv1 and SNMPv2c.
Specify the community string for the management host.
D-Link Smart Managed Switch User Manual
Table 4.9
Table 4.10
20
Advertisement
Table of Contents
