Show Snmp Groups; Create Snmp Host - D-Link DGS-1210/ME series Reference Manual

Example usage:
To display the currently configured SNMP global state on the Switch:
DGS-1210-28P/ME:5# show snmp global state
Command: show snmp global state
SNMP Global State : Enable
DGS-1210-28P/ME:5#

show snmp groups

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS-1210-28P/ME:5# show snmp groups
Command: show snmp groups
SNMP Group Table
Group Name Read View Write View Notify View Security Model Security Level
------------------ -------------- ---------------- --------------- ---------------------- -----------------
sg1
ReadOnly
ReadOnly
ReadWrite ReadWrite
ReadWrite ReadWrite
Total Entries: 5
DGS-1210-28P/ME:5#

create snmp host

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To display the group-names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group
are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
df df
ReadWrite ---
ReadWrite ---
ReadWrite ReadWrite
ReadWrite ReadWrite
To create a recipient of SNMP traps generated by the Switch's
SNMP agent.
create snmp host <ipaddr> [v1 <username 32> | v2c <username
32> | v3 [noauth_nopriv | auth_nopriv | auth_priv] <username
d v3
ReadWrite v1
ReadWrite v2c
v1
v2c
90
AuthPriv
NoAuthNoPriv
NoAuthNoPriv
NoAuthNoPriv
NoAuthNoPriv