Table of Contents
Advertisement
DXS/DWS-3200 series CLI Reference Guide
snmp-server host
The snmp-server host Global Configuration mode command specifies the recipient of Simple Network
Management Protocol Version 1 or Version 2 notifications. To remove the specified host, use the no form of this
command.
Syntax
snmp-server host {ip-address | hostname} community-string [traps | informs] [1 | 2] [udp-port port] [filter
filtername] [timeout seconds] [retries retries]
no snmp-server host {ip-address | hostname} [traps | informs]
Parameters
•
ip-address — Specifies the IP address of the host (targeted recipient).
•
hostname — Specifies the name of the host. (Range:1-158 characters)
•
community-string — Specifies a password-like community string sent with the notification operation.
(Range: 1-20)
•
traps — Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to the host.
•
informs — Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.
•
1 — Indicates that SNMPv1 traps will be used.
•
2 — Indicates that SNMPv2 traps will be used. If
•
port—Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162.
(Range:1-65535)
•
filtername — Specifies a string that defines the filter for this host. If unspecified, nothing is filtered.
(Range: 1-30 characters)
•
seconds — Specifies the number of seconds to wait for an acknowledgment before resending informs. If
unspecified, the default timeout period is 15 seconds. (Range: 1-300)
•
retries — Specifies the maximum number of times to resend an inform request. If unspecified, the default
maximum number of retries is 3. (Range: 0-255)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient is
automatically generated for all the MIB.
When configuring an SNMPv1 notification recipient, the Inform option cannot be selected.
If a trap and inform are defined on the same target, and an inform was sent, the trap is not sent.
Page 285
Advertisement
Table of Contents
