Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Auth-Protocol by Password
Password
Priv-Protocol by Password
Password
Auth-Protocol by Key
Key
Priv-Protocol by Key
Key
IP Address-List Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
SNMP Host Table Settings
This window is used to display and configure the recipient of the SNMP notification.
Description
When selecting v3 in the SNMP Version drop-down list, and selecting
Password in the SNMP V3 Encryption drop-down list, this option is available.
Select the authentication level. Options to choose from are the following:
• MD5 - Select to use the HMAC-MD5-96 authentication level. This field will
require the user to enter a password or key.
• SHA - Specify that the HMAC-SHA authentication protocol will be used.
This field will require the user to enter a password or key.
Enter the Auth-Protocol password here. For MD5 this password must be
between 8 and 16 characters long. For SHA this password must be between 8
and 20 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting
Password in the SNMP V3 Encryption drop-down list, this option is available.
Select the private protocol. Options to choose from are the following:
• None - Specify that no authorization protocol is in use.
• DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-
DES (DES-56) standard. This field will require the user to enter a
password or a key.
• AES - Specify that Advanced Encryption Standard (AES) encryption is in
use. This field will require the user to enter a password or a key.
Enter the Priv-Protocol password here. For none, this field will be disabled.
For DES56 and AES128 this password must be between 8 and 16 characters
long.
When selecting v3 in the SNMP Version drop-down list, and selecting Key in
the SNMP V3 Encryption drop-down list, this option is available. Select the
authentication level. Options to choose from are the following:
• MD5 - Select to use the HMAC-MD5-96 authentication level. This field will
require the user to enter a password or a key.
• SHA - Specify that the HMAC-SHA authentication protocol will be used.
This field will require the user to enter a password or a key.
Enter the Auth-Protocol key here. For MD5 this key must be 32 characters
long. For SHA this key must be 40 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting Key in
the SNMP V3 Encryption drop-down list, this option is available. Select the
private protocol. Options to choose from are the following:
• None - Specify that no authorization protocol is in use.
• DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-
DES (DES-56) standard. This field will require the user to enter a
password or a key.
• AES - Specify that AES encryption is in use. This field will require the user
to enter a password or a key.
Enter the Priv-Protocol key here. For none, this field will be disabled. For
DES56 and AES128 this key must be 32 characters long.
Enter the standard IP access control list (ACL) to associate with the user.
42
Advertisement
Table of Contents
