Create Snmp Host - D-Link DGS-3200 SERIES Cli Manual

Parameters
Parameters
groupname
Restrictions
You must have administrator privileges.
Example
D G S - 3 2 0 0 - 1 0 : 4 # d e l e t e s n m p g r o u p D _ L i n k _ g r o u p
C o m m a n d : d e l e t e s n m p g r o u p D _ L i n k _ g r o u p
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

6-15 create snmp host

Purpose
Used to create a recipient of an SNMP trap operation.
Format
create snmp [ host <ipaddr> | v6host <ipv6addr>] [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv] ] <auth_string 32>
Description
The create snmp host command creates a recipient of an SNMP operation.
Parameters
Parameters
ipaddr
v6host
v1
v2c
v3
auth_string
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the group will be deleted.
Description
The IP address of the recipient for which the traps are targeted.
Specifies the v6host IP address to which the trap packet will be sent.
The least secure of the possible security models.
The second least secure of the possible security models.
The most secure of the possible.
noauth_nopriv neither support packet authentication nor encrypting.
auth_nopriv
auth_priv
The authentication string.
Support packet authentication .
Support packet authentication and encrypting.
77