Table of Contents
Advertisement
HUAWEI NetEngine 8000 F
Hardware Guide
Mechanical Safety
● Wear protective gloves when you are moving the device.
● Use safe lifting practices when moving the equipment. Never attempt to lift
● Before installing the chassis into or removing it from a cabinet, ensure there are
● If main control boards, service boards, and power modules have been installed
● Do not drill unapproved holes into a cabinet, as doing so may impair its
4.1.4.2 Checking the Installation Site
The Device must be used indoors. To ensure normal operations and long service
life of the device, the installation site must meet the following requirements
described in
Table 4-5 Requirements for the installation site
Item
Cleanliness
Dust proofing
Temperature and
humidity
Corrosive gases
avoidance
Issue 05 (2023-03-31)
CA UTION
objects that are too heavy for one person to handle. Instead, seek help or use
appropriate tools.
no objects that could fall from the cabinet and cause injury.
on the chassis, you are advised to remove them before moving the chassis to
prevent them from falling off and causing injury.
electromagnetic shielding and damage cables inside. In addition, drilling holes
produces metal shavings that may enter the cabinet and cause short circuits on
printed circuit boards (PCBs).
Table
4-5.
Requirement
The device must be installed in a clean, dry, and well
ventilated standard equipment room with stable
temperature. The equipment room must be free from
leaking or dripping water, heavy dew, and humidity.
Dustproof measures must be taken in the site. Dust will
cause electrostatic discharges on the chassis and affect
connections of metal connectors and joints. This shortens
service life of the device and may cause failures of the
device.
The temperature and humidity in the installation site must
be within specifications. For the operating temperature
and relative humidity ranges required by the device, see
device overview. If the relative humidity exceeds 70%,
using dehumidifiers or dehumidifying air conditioners is
recommended.
The installation site must be free from acidic, alkaline, or
corrosive gases.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
377
Advertisement
Table of Contents
