Optional) Setting The Lacp Priority Of The System; Optional) Setting The Lacp Priority For An Interface - Huawei AR3200 Series Configuration Manual - Lan

Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN
----End

1.4.7 (Optional) Setting the LACP Priority of the System

Context
Perform the following steps on the AR3200 to set the LACP priority of the system.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
lacp priority priority
The system LACP priority is set for the AR3200.
A smaller LACP priority value indicates a higher priority. By default, the LACP priority of the
system is 32768.
The end with smaller priority value functions as the Actor. If the two ends have the same priority,
the end with a smaller MAC address functions as the Actor.
----End

1.4.8 (Optional) Setting the LACP Priority for an Interface

Context
Perform the following steps on the AR3200 to set the LACP priority for an interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
lacp priority priority
Issue 02 (2012-03-30)
NOTE
l The minimum number of active interfaces must be smaller than or equal to the maximum number
of active interfaces.
l The minimum number of active interfaces on the local AR3200 and that on the remote
AR3200 can be different. If the values of this setting at the two ends are different, the larger value
is used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Link Aggregation Configuration
16