Parker Automation Gemini GV6K Command Reference Manual page 34

Servo drive/controller
Table of Contents

Advertisement

[ + ]
Addition
Type
Operator (Mathematical)
Syntax
See below
Units
n/a
Range
n/a
Default
n/a
Response
n/a
See Also
[ = ], [ () ], [ - ], [ * ], [ / ], [ SQRT ], VAR, VARI, VARB
The addition (
) operator adds the value on the left of the operator to the value on the right of the operator.
+
The addition operator can only be used in conjunction with the
The total command length must be less than 80 characters. The order of precedence is left to right. The
Operation Priority Level (
()
Examples of valid commands:
[ – ]
Subtraction
Type
Operator (Mathematical)
Syntax
See Below
Units
n/a
Range
n/a
Default
n/a
Response
n/a
See Also
[ = ], [ () ], [ + ], [ * ], [ / ], [ SQRT ], VAR, VARI, VARB
The subtraction (
) operator subtracts the value to the right of the operator from the value to the left of the
-
operator. The subtraction operator can only be used in conjunction with the
commands.
The total command length must be less than 80 characters. The order of precedence is left to right. The
Operation Priority Level (
()
Examples of valid command s:
[ * ]
Multiplication
Type
Operator (Mathematical)
Syntax
See Below
Units
n/a
Range
n/a
Default
n/a
Response
n/a
See Also
[ = ], [ () ], [ + ], [ - ], [ / ], [ SQRT ], VAR, VARI, VARB
The multiplication (
) operator multiplies the value to the right of the operator with the value to the left of
*
the operator. The multiplication operator can only be used in conjunction with the
commands. (Values assigned to
The total command length must be less than 80 characters. The order of precedence is left to right. The
Operation Priority Level (
()
Examples of valid commands:
32
Gemini GV6K/GT6K Command Reference
) operators can be used; however, they cannot be nested.
VAR1=1+2+3+4+5+6+7+8+9
VAR2=VAR1+1+(5*3)
VARB1=b1101 + b11001
) operators can be used; however, they cannot be nested.
VAR1=1-2-3-4-5-6-7-8-9
VAR2=VAR1-1+(5*3)
VARB1=b111101 - b11001
variables are truncated to integer values.)
VARI
) operators can be used; however, they cannot be nested.
VAR1=1*2*3*4*5*6*7*8*9
VAR2=VAR1-1+(5*3)
VARB1=b111101 * b11001
www.comoso.com
Product
GT6K
GV6K
,
and
commands.
VAR
VARI
VARB
Product
GT6K
GV6K
,
and
VAR
VARI
VARB
Product
GT6K
GV6K
,
VAR
VARI
Rev
6.0
6.0
Rev
6.0
6.0
Rev
6.0
6.0
and
VARB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gemini gt6k

Table of Contents