Show Privilege - Allied Telesis x310-26FT Command Reference Manual

U A C
SER CCESS OMMANDS

SHOW PRIVILEGE

show privilege
Overview This command displays the current user privilege level, which can be any privilege
level in the range <1-15>. Privilege levels <1-6> allow limited user access (all User
Exec commands), privilege levels <7-14> allow restricted user access (all User Exec
commands plus Privileged Exec show commands). Privilege level 15 gives full user
access to all Privileged Exec commands.
show privilege
Syntax
Mode User Exec and Privileged Exec
Usage A user can have an intermediate CLI security level set with this command for
privilege levels <7-14> to access all show commands in Privileged Exec mode and
all commands in User Exec mode, but no configuration commands in Privileged
Exec mode.
Example To show the current privilege level of the user, use the command:
awplus#
Output Figure 3-1:
Related privilege level
Commands
C613-50103-01 REV A
show privilege
Example output from the show privilege command
awplus#show privilege
Current privilege level is 15
awplus#disable
awplus>show privilege
Current privilege level is 1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
180