Installation Procedures; Summary - HP 5300xl Series Installation And Getting Started Manual

Table of Contents

Advertisement

Installing the Series 5300xl Switches

Installation Procedures

Installation Procedures

Summary

Follow these easy steps to install your switch. The rest of this chapter provides
details on these steps.
1.
2.
3.
4.
5.
6.
2-2
Prepare the installation site
environment into which you will be installing the switch is properly
prepared including having the correct network cabling ready to connect
to the switch, and having a good location for the switch. Please see
2-4
for some installation precautions.
Install switch modules
or eight universal slots for installing any of the HP ProCurve Switch xl
modules. The Switch 5372xl has three 24-port 10/100-TX xl Modules
preinstalled, and the Switch 5348xl has two 24-port 10/100-TX xl Modules
preinstalled. Depending on where you will install your Series 5300xl
Switch, it may be easier to install the modules first. The modules are "hot
swappable" though, so they can also be installed and removed after the
switch is powered on.
Note: Make sure you use only HP ProCurve Switch xl Modules in
your Series 5300xl Switches.
(Optional) Install second power supply
Switches have a slot in the back for installing a second, load-sharing
power supply. If you have purchased this supply, it may be easier to install
it before mounting the switch.
Verify the switch passes self test
of plugging the switch into a power source and observing that the LEDs
on the switch's front panel and on the modules show correct operation.
Mount the switch
(page
mounted in a 19-inch telco rack, in an equipment cabinet, on a wall, or on
a horizontal surface. There are some limitations to the wall mounting
orientations that are supported. Please see the installation details for
more information.
Connect power to the switch
plug it in to the nearby main power source.
(page
2-5). Make sure that the physical
(page
2-7). The Series 5300xl Switches have four
(page
(page
2-11). This is a simple process
2-13). The Series 5300xl Switches can be
(page
2-18). Once the switch is mounted,
page
2-9). The Series 5300xl

Advertisement

Table of Contents
loading

Table of Contents