Diagnostics; Maintenance Analysis Procedures; Factory Defaults - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

This chapter describes diagnostic procedures used by service representatives to isolate
HP StorageWorks Edge Switch 2/24 problems or failures to the field-replaceable unit
(FRU) level. The chapter specifically describes how to perform maintenance analysis
procedures (MAPs).

Maintenance Analysis Procedures

Maintenance Analysis Procedures (MAPs) provide fault isolation and related service
procedures. They are step-by-step procedures that prompt service personnel for
information and describe a maintenance action. They provide information to interpret
system events, isolate a switch failure to a single FRU, remove and replace the failed
FRU, and verify switch operation.

Factory Defaults

Table 2–1 lists the defaults for the passwords, and IP, subnet, and gateway addresses.
Table 2–1: Factory-Set Defaults
Customer password
Maintenance password
IP address
Subnet mask
Gateway address
edge switch 2/24 service manual
Item
password
level-2
10.1.1.10
255.0.0.0
0.0.0.0
Default

Diagnostics

2
2–1