Figure 6 2U rack mounting rail kit
(1) Chassis rail
Rack-mounting procedures at a glance
Figure 7 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.
Follow these guidelines when you install the switch in a 19-inch rack:
The distance between the front and rear posts of the rack must meet the requirements described
•
in
Table
To secure the switch to the rack, you must install not only mounting brackets, but also chassis rails
•
and slide rails.
Table 6 Distance requirements between the front and rear rack posts
Switch model
•
HP 5930-32 QSFP+
•
HP 5930-32 QSFP+ TAA
•
HP 5930-2Slot+2QSFP+
•
HP 5930-2Slot+2QSFP+
TAA
6.
Installation method
Using provided mounting
brackets and chassis rails
Using provided mounting
brackets and chassis rails
(2) Slide rail
Minimum distance
405 mm (15.94 in)
520 mm (20.47 in)
10
Maximum distance
854 mm (33.62 in)
789 mm (31.06 in)