Using Hafm To Configure The Edge Switch; Setting The Edge Switch Online And Offline - HP 316095-B21 Installation Manual

4

Using HAFM to configure the Edge Switch

This chapter tells you how to use HAFM to perform the most common configuration tasks for the
Edge Switch 2/32:
NOTE: For a complete reference on HAFM functionality, see the HP StorageWorks HA-Fabric
Manager user guide.
• Setting the Edge Switch online and
• Configuring Edge Switch
• Configuring Edge Switch management
• Configuring fabric operating
• Configuring switch
• Configuring preferred
• Configuring
• Configuring SNMP trap message
• Configuring, enabling, and testing e-mail
• Configuring and enabling call-home
• Configuring and enabling Ethernet
• Configuring, enabling, and testing call-home event
• Threshold
• Configuring SANtegrity
• Backing up HAFM configuration
• Resetting configuration
• Enabling the HAFM Basic
• Enabling Telnet, page 72
• Connecting the Edge Switch to a

Setting the Edge Switch online and offline

When the Edge Switch is set online, an attached device can log in to the Edge Switch if the port is
not blocked. Attached devices can communicate with each other if they are configured in the same
zone.
When the Edge Switch is set offline, all ports are set offline. The Edge Switch transmits the offline
sequence (OLS) to attached devices, and the devices cannot log in to the Edge Switch.
identification, page 48
parameters, page 53
binding, page 55
path, page 55
ports, page 56
alerts, page 63
Authentication, page 69
data, page 70
interface, page 72
offline, page 47
style, page 49
recipients, page 59
notification, page 59
features, page 62
events, page 62
notification, page 62
data, page 70
fabric, page 72
Edge Switch 2/32 installation guide 47