Set The Switch Online Or Offline; Set Online State; Set Online Warning Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Repair Information

Set the Switch Online or Offline

This section describes procedures to set the switch online or offline. These
operating states are described as follows:
Note:
is disrupted. Do not set the switch offline unless directed to do so by a procedural step
or the next level of support.

Set Online State

To set the switch online:
1. At the HAFM server, open the HAFM application. The Product View
2. Select the icon representing the switch to be set online. The Hardware View
3. At the navigation control panel, select Set Online State from the
Figure 39: Set Online Warning dialog box
4. Click Set Online. A Warning dialog box displays, indicating the switch is to
5. Click OK. As the switch comes online, inspect the Product Manager
150
Online–when the switch is set online, an attached device can log in to the
switch if the port is not blocked. Attached devices can communicate with each
other if they are configured in the same zone.
Offline–when the switch is set offline, all switch ports are set offline. The
switch transmits the offline sequence (OLS) to attached devices, and the
devices cannot log in to the switch.
When the switch is set offline, the operation of attached Fibre Channel devices
displays.
for the selected switch displays.
Maintenance menu. If the switch is offline, the Set Online State dialog box
displays, indicating the state is OFFLINE.
be set online.
application. The State field of the Status table displays ONLINE.
Edge Switch 2/24 Service Manual