BF175AK3/BF200AK3/BF225AK3/BF250A
CABLE/ELECTRICAL CONNECTIONS
(motor side)
ELECTRIC PARTS COVER REMOVAL (BF175A/
BF200A/BF225A)
Remove the rubber band (1) from the electric parts cover (2).
Pull the upper section of the electric parts cover toward you lightly,
then lift up the lower section of the electric parts cover lightly and
pull the cover horizontally. Take care not to break the plastic knobs
(3) on the cover.
CABLE/WIRE ROUTING (BF175A/BF200A/BF225A)
Connect the main wire harness 14P connector (1) to the switch
panel wire harness connector and the 6P connector (2) to the
indicator panel wire harness connector, and then attach them to the
connectors holder.
Set the switch panel wire harness to the crankcase groove.
Secure the indicator panel wire harness (1), switch panel wire
harness (2) and interface cable (Optional equipment) (3) to the wire
harness band (4).
18
(2)
(3)
(2)
(4)
(2)
(1)
(1)
(1)
(3)