Fuel System
4. Inspection Items
1) Inspection of Fuel Feed System Piping
1.
Remove top cowl and check each section for fuel leak, dirt,
deterioration and damages. Clean or replace parts if
necessary.
2) Draining Fuel
Remove fuel tank, fuel hose and carburetor
after fully drain the fuel from these parts.
1.
Remove fuel tank cap
Set fuel cock knob 2 to full open position a.
2.
3.
Place a piece of rag below the carburetor, and loosen drain
screw 3 to drain all fuel.
Retighten drain screw 3.
4.
4-12
WARNING
1 and use fuel pump to remove fuel.
a a
3
1
2
a
4st 4/5/6 2011