Pin Configuration - Toshiba TMPR4925 Manual

14.3.1.2 5.1 Channel Audio Connection
This sample assumes one CODEC with four DACs mapped to stereo front (3&4) and stereo rear
(7&8) slots, and another CODEC with two DACs mapped to center (6) and LFE (9) slots.
Figure 14.3.2 5.1 Channel Audio Connection Diagram
14.3.2

Pin Configuration

To utilize ACLC, the Select ACLC (SELACLC) bit in Pin Configuration Register (PCFG) must be
set to 1. Refer to the Sections 3.3 and 5.2.3 for the detail of the pin configuration.
ACLC 4 Channel Audio CODEC (CODEC ID='0')
SYNC SYNC
BITCLK BIT_CLK
SDOUT SDATA_OUT
ACRESET* RESET#
SDIN0 SDATA_IN
SDIN1
SYNC
BIT_CLK
SDATA_OUT
RESET#
SDATA_IN
2 Channel Audio CODEC (CODEC ID='3')
14-4
Chapter 14 AC-link Controller
CID1
CID0
CID1
CID0
GND