Rj45 Connector Pin Layout; Tcp - Toshiba TOSVERT VF-MB1/S15 IPE002Z Function Manual

2.2. RJ45 connector pin layout

The EtherNet/IP™ - Modbus
connectors.
When you use VF-MB1, the shielding is connected to the drive ground. When you use
VF-S15, the shielding is connected to the grounding terminal of option adapter.
Use an STP (shielded twisted pair) Ethernet cable.
The transmission speed is detected automatically by the unit (10 Mbps or 100 Mbps).
The card can operate in half duplex or full duplex mode, whether connected to a hub or a
switch and regardless of the transmission speed (10 Mbps or 100 Mbps).
* Fix a cable so that a communication connector may be not taken the weight of wire.
2.3. Example of connection to an EtherNet/IP™ and Modbus
Example of daisy chain topology and star topology
PLC
Ethernet switch
®
TCP option is equipped with two shielded RJ45
Port L and Port R
8..................1
Daisy chain topology
- 5 -
Pin Signal
1 TD+
2 TD-
3 RD+
4 -
5 -
6 RD-
7 -
8 -
Star topology
E6581741
®

TCP