Intec MLC 8000 Operating Manual page 7

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
TSE Tableausteuereinheit
UCM Upper Correction Magnet
UEA Universelle Ein-/Ausgabe-
Baugruppe
UPLS Upper Prelimit Switch
USI Upper Signaler
VU Vorendschalter unten
VO Vorendschalter oben
re-levelling with open car doors; is used only
when using the main board MCU
Name of a control assembly which is connected
on control bus (CAN bus) inside the car panel for
connection of car calls, special items / outputs or
serves as a car position indicator.
As TSE different modules can be used
- UEA
- LCI16
- MS3-C
- PMA
- LCD-047
- LCD-057
Switching point (magnet) of the upper pre-limit
switch UPLS; Designation is used only when
using the main board MCU
Universal input / output module; control Module
with CAN-Bus connection and 8 inputs / outputs;
Available in 2 versions:
- UEA.1: inputs / outputs to 0V switching
- UEA.2: inputs / outputs to 24V switching
The UEA can be used depending on the
configuration for various purposes:
- As ESE for connection of landing calls
- TSE to connect the car calls
- As ASE for controlling the drive unit
- As PSE for connecting an incremental
encoder via CAN
see VO; Designation is used only when using the
main board MCU
see SGO; Designation is used only when using
the main board MCU
lower prelimit switch; used as reference point for
the positioning
upper prelimit switch; used as reference point for
the positioning
7/196