Preliminary - Intec MLC 8000 Operating Manual

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0

0. Preliminary

The main board of the lift controller MLC 8000 exists in 2 different versions:
- HSE board with integrated safety circuit and socket for modem or Ethernet interface
- MCU board without integrated safety circuit
The two boards also differ from each other in the external form; the functioning and
integrated application are still largely identical.
Depending on the main board used the name of the other boards differ from each other ,as
well as some specific control switches.
Mainly the board HSE is used, so that the present description relates also to this board.
Basically, the present description is also applicable to control systems in which the MCU
board is used.
Following is a list with the various names by the HSE or MCU:
Board
Car board
Boards in the car operating panel
Boards in landing operating panel
Safety circuit
Drive control board
Positioning unit
Diagnosis unit
CAN bus coupler
Double-AWG (for moving with open door)
AWG2 adaptor board (Double-AWG)
Lower prelimit switch
Switching point of lower prelimit switch
Upper prelimit switch
Switching point of upper prelimit switch
Door zone switch (Level switch)
Lower door zone switch
Upper door zone switch
Slow down switch
Correction switch (Reference switch)
Relay on the main board
Emergency relay on the main board
Inputs of the main board
Main board HSE
FVE
TSE
ESE
Integrated safety
relays KH5, KH6 and
KH7
ASE
PSE
DSE
CBK
AWG2
PSE2
VU
VU
VO
VO
SGM
SGU
SGO
SGV
SGE
KH11-16, KH41-42
KH31
E1-8 (BR, U2, MAX,
U1, MIN, RHEin,
Auf, Ab)
10/196
Main board MCU
CDU
PCU
LCU
SRU
DCU
CPA
HHT
CBC
SAF
POS2
LPLS
LCM
UPLS
UCM
MSI
LSI
USI
SDS
RSI
KM1-8
KM-CA
IM1-8