Appendix 1.4 Module Fve 1.2 - Intec MLC 8000 Operating Manual

Lift controller

Table of Contents

INTEC GmbH

Lift controller MLC 8000

22/12/2016

Operating manual V2.0

Characteristics and features:

The module FVE is designed as an intelligent distribution board for use on the car roof or in the car

operation panel COP. Therefore several distribution terminals are located on the FVE, which means

no additional terminals are required normaly on top of car car or in the car operation panel COP.

PIC18-Microcontroller with integrated Flash memory (32kByte), RAM (1536 Byte) and EEPROM

(256 Byte)

integrated CAN bus controller

CAN interface with high speed driver according to ISO11898 with galvanic isolation

Supervision input for car light power (110V / 230V AC, 50 / 60 Hz), galvanic isolated

Relay for switching off car light

Relay for car ventilator

ICSP interface for In-Circuit programming (Software download)

8 Inputs and 8 Outputs, always 1 input and 1 output connected together onboard (lowside active)

18 free programmable digital inputs (lowside active)

4 free programmable relays

4-layer PCB with internal power layers

integated emergency light output (max. 800 mA)

integrated alarm relay with 1 changeover contact (only Hardware version 2.1)

connector for handheld terminal (hardware version 1.1: Mini-DIN connector, Adapter cable

necessary)