Intec MLC 8000 Operating Manual page 141

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
Main function Sub function/
Direction/
Floor
Moving up
Moving dn
Evacuation Evac.active
Evac.stopped
Visit.call 1 Callfloor
Vis.call2 up Callfloor
Vis.call2 dn Callfloor
Visit.call 3 Callfloor
Targ.call up Callfloor
Targ.call dn Callfloor
Vis.CC enab. Callfloor
Vis.LC enab. Callfloor
Floor Doors
- -
- -
- -
- -
Targetfloor Doors in
Call- and
Target floor
Targetfloor Doors in
Call- and
Target floor
Targetfloor Doors in
Call- and
Target floor
Targetfloor Doors in
Call- and
Target floor
Targetfloor Doors in
Call- and
Target floor
Targetfloor Doors in
Call- and
Target floor
- Doors
- Doors
141/196
Description
again and the lift is stopped; falling below the speed, the output
switches off and the brake will open again.
Lift is moving upwards
Lift is moving downwards
Evacuation trip according to EN81-76 active
Evacuation trip stopped
Call acknowledgement for Visitor call 1 (see input functions)
Call acknowledgement for Visitor call 2 in upward direction (see
input functions)
Call acknowledgement for Visitor call 2 in downward direction (see
input functions)
Call acknowledgement for Visitor call 3 (see input functions)
Call acknowledgement for Target call in upward direction (see input
functions)
Call acknowledgement for Target call in downward direction (see
input functions)
Output for signaling that car call is enabled for programmed time
by a visitor call 1 or 2
Output for signaling that landing call is enabled for programmed
time by a visitor call 1 or 3