Intec MLC 8000 Operating Manual page 163

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
Position Function
XH16 Akku+
Akku-
XH17 Modul 4
XH18 Modul 3
XH19 Modul 2
XH20 Modul 1
Technical specifications:
Temperature range:
Max. power consumption by 24V:
Max. input current E2/E4:
Max. input current E1/3/5/6/7/8:
Max. current KH11-KH16; KH41-KH42:
Max. input current of 230V-inputs
(Safety circuit, Contactor supervision):
Mechanical dimensions:
Characteristics and features:
- Highly integrated Infineon – Microcontroller with internal Flash memory
- Modern FRAM Technology for storing events, faults and other data
- Integrated battery charging circuit
- Operation of HSE with battery power supply possible
- battery buffered 24V power supply output
- Integrated real-time clock
- 2 opto-isolated CAN-Bus systems (conterl bus, shaft bus)
- 1 USB interface (only hardware version 1.5)
- 1 RS232 interface
- 6 opto-isolated digital inputs, low active
- 2 opto-isolated inputs for PTC; also usable as digital inputs (low active)
- 4 TÜV-certified, EN81 compliant safety circuit monitoring inputs 110V/230V AC, 50/60Hz (opto-
isolated)
- 1 110V/230V AC, 50/60 Hz input (opto-isolated)
- 2 EEPROM memories for parameters (32kByte each; in socket)
- 4-layer PCB with internal power layers
- JTAG interface for software update
- Software update by RS232 / USB / Ethernet / Modem / GSM possible (only hardware version 1.5)
- 8 freely programmable Relays
- integrated alarm call relay
- various LED status indicators
- Keypad with 12 keys
- LCD – Display 4 lines / 16 characters
Positive pol of external 12V battery (battery charging)
Pluspol Notstromakku 12V
Negative pol of external 12V battery
Slot 4 for connecting a UEA to power supply and CAN bus
For configuration see description of Jumper XHJ7/XHJ8/XHJ9 above
Slot 3 for connecting a UEA to power supply and CAN bus
For configuration see description of Jumper XHJ4/XHJ5/XHJ6 above
Slot 2 for connecting a UEA to power supply and CAN bus (shaft bus)
Slot 1 for connecting a UEA to power supply and CAN bus (shaft bus)
0°C to +60°C
<500mA @ 25°C (all relays and inputs active)
2mA @ 25°C / Input
10mA @ 25°C / Input
8A/250V AC / Relay
10mA @ 25°C, 230VAC, 50Hz / Input
Length: 292mm
Width: 183mm
Height: ca. 40mm