Intec MLC 8000 Operating Manual page 33

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
1. Menu level 2. Menu level
ESE in-/outputs
3. Menu level
TSE 2
TSE 2 Inputs
TSE 2 Outputs
...
Add PCB
Remove PCB
Copy PCB
ESE 1.1
ESE 1.1 Inputs
4. Menu level
8:
1:
...
8:
1:
...
8:
Finally the new TSE is only added if at least 1 input or output function
Node ID
Add TSE
Node ID
Remove TSE
Source ID
Target ID
Copy parameter
1:
...
33/196
Description
Function of ouput 8 of TSE1
Function of input 1 of TSE2
...
Function of input 8 of TSE2
Function of ouput 1 of TSE2
...
Function of ouput 8 of TSE2
With this menu item another car panel unit TSE can be added (max.
16).
is defined for this TSE.
Set node ID of new TSE board
Add TSE board with the defined node ID (see above)
With this menu item an unused car panel unit TSE will be deleted (it
will delete all input-output functions of the TSE)
Node ID of the TSE which will be deleted
TSE to be deleted with the above entered number
Copy all parameters of one TSE to another
Number of TSE, of which the parameters are to be copied
Number of TSE, to which the parameters are to be copied
Copy parameters from source to destination TSE
Function of the inputs and outputs of the landing panel unit ESE
...
Function of input 1 of ESE1, branch 1
...