State Display 5 (Emergency Evacuation) - Intec MLC 8000 Operating Manual

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0

10.5 State display 5 (Emergency evacuation)

1

A
B
F l u
C
v =
D
This State display if shown, if emergency evacuation by brake opening is activated (if input
"UPS Evacuat." - "UPS brake" is switched on).
The bar graph in second line shows the moving direction and moving speed of the lift (bar
graph to the right - upward direction; to the left - downward direction).
If the lift reaches the level zone the display showns "Flush".
FP: Actual floor
Flush: 3 black squares if lift is in floor level
v: Actual lift speed in mm/s
S p
s h :
e e d
m m /
F P :
s
16


3