Intec MLC 8000 Operating Manual page 176

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
XU6
Pin1
LED
UEA.2 Hardware-Version 2.0
Position Pin Function
XU1 1 +24V
2 0(24V)
3 CAN+
4 CAN-
XU2 1 0(24V)
2 D1
3 D2
4 D3
5 D4
6 D5
7 D6
8 D7
9 D8
10 +24V
XU3 1 D1
2 D2
3 D3
4 D4
5 D5
6 D6
7 D7
8 D8
9 0(24V)
10 +24V
XU4 Connector for plugging UEA on HSE, FVE or TVE
1 Pin1
2 +24V
3 0(24V)
4 CAN+
5 CAN-
6 Pin6
XU5 Connector for Software download
XU4
XU7
Pin1
Pin1
Pn2 Pin1
+24V Power supply input
0V Power supply input
CAN-Bus – High signal
CAN-Bus – Low signal
0V Power supply for inputs / outputs
8 inputs / outputs E1-E8 and A1-A8, low active (UEA.1) or high active
(UEA.2), free programmable.
Connector XU2 is in parallel to XU3 (same inputs/outputs)
+24V Power supply for inputs / outputs
8 inputs / outputs E1-E8 and A1-A8, low active (UEA.1) or high active
(UEA.2), free programmable.
Connector XU3 is in parallel to XU2 (same inputs/outputs)
0V Power supply for inputs / outputs
+24V Power supply for inputs / outputs
Not used (closed to protect against incorrect connection)
+24V Power supply input
0V Power supply input
CAN-Bus – High signal
CAN-Bus – Low signal
Not used (closed to protect against incorrect connection)
XU4
XU6
Pin1
Pin1
LED
UEA.1 Hardware-Version 2.0
XU7
Pin1
Pn2 Pin1