Intec MLC 8000 Operating Manual page 158

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
Position Function
A-
A+
+24A
XM14 -B
+A
0V
XM15 0V
IM1
IM2
IM3
IM4
IM5
IM6
IM7
IM8
0V
Technical specifications:
Temperature range:
Max. power consumption by 24V:
Max. input current IM1, IM2:
Max. input current IM3 to IM8:
Max. current KM1 to KM8 and KM-CA:
Max. input current of 230V-inputs
(Safety circuit, Contactor supervision):
Mechanical dimensions:
Characteristics and features:
- Highly integrated Infineon – Microcontroller with internal Flash memory
- Modern FRAM Technology for storing events, faults and other data
- Integrated battery charging circuit
- Operation of MCU with battery power supply possible
- battery buffered 24V and 12V power supply output
- Integrated real-time clock
- 2 opto-isolated CAN-Bus systems (conterl bus, shaft bus)
- 1 opto-isolated RS485 interface,
- 1 RS232 interface
- 6 opto-isolated digital inputs, low active
- 2 opto-isolated inputs for PTC; also usable as digital inputs (low active)
Encoder Channel A- (inverted signal); 5V or 10..30V (see Jumper JP4+JP5)
Encoder Channel A+; 5V oder 10..30V (see Jumper JP4+JP5)
Battery buffered +24V power supply for encoder
RS485-Bus (Low-Signal)
RS485-Bus (High-Signal)
0V – power supply for RS485-Bus
0V – power supply (Common for inputs IM1-IM8)
MCU Input 1, for thermistor; Input is active if resistance of thermistor < 1.5kΩ.
Input may also be used as digital input
MCU Input 2, for thermistor; Input is active if resistance of thermistor < 1.5kΩ.
Input may also be used as digital input
MCU Input 3, Low-aktiv (24V DC)
MCU Input 4, Low-aktiv (24V DC)
MCU Input 5, Low-aktiv (24V DC)
MCU Input 6, Low-aktiv (24V DC)
MCU Input 7, Low-aktiv (24V DC)
MCU Input 8, Low-aktiv (24V DC)
0V – power supply (Common for inputs IM1-IM8)
0°C to +60°C
<500mA @ 25°C (all relays and inputs active)
2mA @ 25°C / Input
10mA @ 25°C / Input
8A/250V AC / Relay
10mA @ 25°C, 230VAC, 50Hz / Input
Length: 241mm
Width: 190mm
Height: ca. 40mm