INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
-
Supervision input for car light power (110V / 230V AC, 50 / 60 Hz), galvanic isolated
-
Relay for switching off car light
-
Relay for car ventilator
-
ICSP interface for In-Circuit programming (Software download)
-
8 Inputs and 8 Outputs, always 1 input and 1 output connected together onboard (lowside active)
-
18 free programmable digital inputs (lowside active)
-
4 free programmable relays
-
integrated alarm call relay (potential free changeover contact)
-
4-layer PCB with internal power layers
-
integated emergency light output (max. 800 mA)
-
integrated alarm relay with 1 changeover contact (only Hardware version 2.1)
-
connector for handheld terminal
Appendix 1.5 Module UEA
XU6
Pin1
XU5
Pin1
UEA.2 Hardware-Version 1.1
Difference between UEA.1 ↔ UEA.2: The circuit I3 of UEA.1 has two pins less, so
that a white frame from the PCB layout can be seen left of the circuit I3 (see red
frame in the pictures).
XU4
XU7
LED
Pin1
Pin2
Pin1
XU4
XU6
Pin1
XU5
XU7
Pin1
UEA.1 Hardware-Version 1.1
LED
Pin1
Pin2
Pin1