Intec MLC 8000 Operating Manual page 177

Lift controller
Table of Contents

Advertisement

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
XU6
Jumper for setting of node ID:
Jumper set to the left (PCB edge): Normal operation
Jumper set to the right: Initialization mode (setting of node ID)
XU7
Jumper for CAN bus terminator
→ Jumper must be set if UEA is located at the end of the CAN bus cable.
LED
LED "Software is running"
The UEA is a universal module with 8 inputs and 8 outputs and CAN bus connection, which
can perform various tasks within the lift controller MLC-8000.
The function is activated by setting the node number.
Functional name
Description
ASE
UEA on control bus as an interface to drive (frequency converter,
electronic valve control, ...)
PSE
UEA on control bus for connecting an incremental encoder for positioning;
tranformation of encoder signals to CAN-bus information.
The PSE is usually used if the incremental encoder is mounted on top of
car.
TSE1...16
UEA on control bus for connecting car calls, key switches, indicators and
so on. Normally used inside car operation panel COP.
ESE1.1 ...
UEA on shaft bus for connecting landing calls, key switches, indicators
ESE64.8
and so on. Normally used inside landing operation panel LOP or inside
main controller box.
PSE2
UEA in connection with double AWG for switching the second door zone
signal (for safety unit) on a separate CAN bus.
For this function a special software must be used on UEA.
Simulation
UEA on control bus for lift simulation purposes (test mode, demonstration
mode)
Door simulator
Simulation of a CANopen operated door controller (for test purposes).
For this function a special software must be used on UEA.
Technical specifications:
Temperature range:
Current in idle mode:
Max. input current D1-8:
Max. output current D1-8 (UEA.1):
Max. output current D1-8 (UEA.2):
Mechanical dimensions:
Characteristics and features:
0°C to +60°C
about 35mA @ 25°C
10mA @ 25°C / input
500mA @ 25°C / output
350mA @ 25°C / output
Length: 50mm
Width: 50mm
Height: ca. 20mm (without
connectors)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents