Appendix 1.7 Module Lci16 - Intec MLC 8000 Operating Manual

INTEC GmbH
22/12/2016
Characteristics and features:
- Position indicator 15*7 dots
- selectable orientation: horizontal or vertical
- Standard colour red, optional in green and blue
- PIC18 microcontroller with internal Flash (32kByte), RAM (1536 Byte) and EEPROM (256 Byte)
- integrated CAN controller
- CAN interface with high-speed driver according to ISO11898 with galvanic isolation
- ICSP interface for In-Circuit-Programming (Software download)
- 8 inputs and 8 outputs, always 1 input and 1 output onboard connected
- PMA.1: lowside switching inputs / outputs
- PMA.2: highside switching inputs / outputs
- Even if always 1 input and 1 output are connected together the may be used for different
functions at the same time, because every active output is switched off every 9ms for 3ms (pulsed
output) to enable reading of the input in this time.
Example: Input used as car call, output used as level indicator

Appendix 1.7 Module LCI16

Pin1
XU2
Pin1
XU3
Pin1
XU1
JP5
Hardware Version 1.0 (G-173A)
Lift controller MLC 8000
Operating manual V2.0
XU8
LED
XU5
Pin1
XU2
Pin1
XU3
Pin1
XU1
XU6
XU7 JP1
Hardware Version 2.0 (G-173B)
XU8
LED
XU6
XU5
XU7