Intec MLC 8000 Operating Manual page 44

Lift controller
Table of Contents

Advertisement

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
1. Menu level
2. Menu level
3. Menu level
4. Menu level
Bearer ↓
Waitt. ↑ [s]
Waitt. ↓ [s]
Debounc. [ms]
Insp. ↑ [mm]
Insp. ↓ [mm]
Apron
Slow ↑ [mm]
Slow ↓ [mm]
44/196
Description
top shelter space was opened or inspection is switched on). In
standstill the bearer is switched off.
End off.: The bearer is only switched on if the lift arrives the top floor
Bearer type for safety shelter in shaft bottom:
No: No bearer necessary / available
manual: hand operated bearer
always: The bearer is always switched on in normal operation and
only switched off when the bottom shelter space is opened (e.g. by
opening shaft door in top floor) or the inspection control in pit is
switched on.
moving: The bearer is switched on while the lift is moving (but not if
top shelter space was opened or inspection in pit is switched on). In
standstill the bearer is switched off.
End off.: The bearer is only switched on if the lift arrives the bottom
floor.
Max. Waiting time for feedback contacts of the top bearer after
switching an automatic bearer. If the bearer contacts did not switch
after this time, an error message follows.
See above (for bearer in bottom)
Debouncing time for bearer contacts
Extended slowing and stopping distance at inspection trip (with bearer
in upwards direction)
Extended slowing and stopping distance at inspection trip (with bearer
in downwards direction)
no: No folding car apron available
manual: Manually operated car apron; which means, Apron needs to
be folded in manually in order to return to normal operation
Auto: utomatically operated car apron; which means, when folding
apron is extended, then automatically the lift moves when returning to
normal operation somewhere below the lowest floor to automatically
retract folding apron (apron is then held electric)
mechan.: Mechanically operated car apron; which is, Folding apron
pushes together when reaching the bottom floor , and ramps up when
leaving the lowest floor out again
Extended slow down distance for top floor, if lift is equipped with
folding apron.
See above; setting for bottom floor

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents