Intec MLC 8000 Operating Manual page 21

INTEC GmbH
Lift controller MLC 8000
22/12/2016
Operating manual V2.0
1. Menu level 2. Menu level 3. Menu level 4. Menu level
Sl.start[ms]
Contact.[ms]
Braket. [ms]
Ready=1 [ms]
Brake=1 [ms]
Mov. =1 [ms]
Brake=0 [ms]
Ready=0 [ms]
Error
Sign.delayed
Pos.mode
Quickstart
21/196
the next action (e.g. opening the doors or starting a new journey)
Delay when switching on the slow-start contactor if switching from
fast to slow. If, for example, used for pole-changing motors where in
the supply line of the slow winding-up resistors are connected.
If the lift starts directly at slow speed , then the starting contactor is
Max. waiting for contactor supervising input (while switching on and
Max. waiting for brake supervising inputs (while switching on and
Only if "Ready" signal from drive exist: Max. waiting time for "Ready"
Only if "Brake" signal from drive exist: Max. waiting time for "Brake"
Only if "Moving" (Speed > 0) signal from drive exist: Max. waiting time
Only if "Brake" signal from drive exist: Max. waiting time for "Brake"
Only if "Ready" signal from drive exist: Max. waiting time for "Ready"
Delay between activation of an error signal from the drive and
[ms]
response of the lift controller
No: main contactors and speed signals are activated at the same time
Yes: speed signals are activated delayed (see above parameter
Special mode for lifts with CANopen drive, where the inverter selects
the optimum driving speed itself. Notably, the arrival behavior and
travel time are optimized, especially for short floors.
Other Requirements: Positioning with CAN open interface
By Quick Start the motor is already energized and the brake is
released while the doors close. So the delay time is minimized during
For the function Quick Start a safety circuit for moving with open
Note: While starting the movement the door lock bypass (safety
circuit) is switched off. So it is necessary to adjust the parameter
"Wt.start[ms]" (see "Timer parameter" above) in a way, that the safety
circuit of the doors is really closed in the moment the door lock
bypass is switched off; otherwise the error "SL off trip" occurs.
Description
activated immediately.
switching off contactors)
switching off the brake)
signal
signal
for "Moving" signal
signal of at trip end
signal of at trip end
"Startdel [s].)
starting.
doors is necessary.